Today, roads leading to the creep of solid attractions. So, a few roads outside the city experienced a line density of vehicles long enough. For car drivers, in the face of that line, the indicator may be a sudden the engine temperature rises pointer alias approached writing “H”. Meanwhile, the car did not have a needle indicator. Notified by the heat engine image “pole with three stripes on the top and underneath as there is water” glowing red.

If it were so, do not force the car because it can cause path broken machine. Well, for that, follow the steps below.

1. Pull the car immediately and directly off the engine.
2. Open the hood and turn the ignition key to position “ON”. Note, if the electric fan rotates normally or weakening.
3. If the electric fan was not working, check fuses, thermo switch, and relays. If constraints are not a fan electrical systems found, then the step is to disconnect the socket EMERGENCY electric fan and connect it directly to pole position (+) and negative (-) battery cables.  Note the direction of fan rotation to match the cable under normal conditions. If the fan does not spin, it means that the electric motor is damaged.
4. Note the leakage that may occur in the machine. If you use radiator coolant, leak detection becomes easier because the young colored liquid is seen.
5. Another possibility of leakage occurs in water pump, radiator hoses, radiator, and hoses stuck.
6. If there are leaks, EMERGENCY step is to remove the radiator cap. Remember, do not jump. Do it slowly until the pressure decreases. If already open, then add water, uncovered, then the engine starter. Indirectly aimed at installing the radiator cap so that the pressure on the system is not too high. Next, take it to the nearest garage.